Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Underground Storage Tank (UST) Overfill Valve Replacement

Active

Federal

Response Deadline08/10/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the replacement or installation of a 71SO-410C OPW Vapor Tight Overfill Valve with automatic shutoff functionality at 95% tank capacity to ensure safe operation and prevent overfilling of underground storage tanks, thereby mitigating environmental risks and regulatory violations. The work is scoped to meet strict safety and environmental compliance standards, focusing specifically on vapor-tight integrity and automatic shutoff reliability under operational conditions. This is a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside subcontract under NAICS code 238990, issued by the Department of Veterans Affairs through the 260-NETWORK Contract Office 20. The place of performance is in Walla Walla, Washington, with a response deadline of August 10, 2026, and the solicitation was posted on July 28, 2026. The contractor must be certified as an SDVOSB to qualify for award, and the project requires precise technical execution to ensure regulatory compliance and system reliability.

General Info

Replace 71SO-410C vapor tight overfill valve with automatic shutoff at 95% capacity for VA in Walla Walla, WA.

Agency

Department Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)View Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

Walla Walla, WA, 99362, USA

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 02:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Replace or install a 71SO-410C OPW Vapor Tight Overfill Valve with automatic shutoff at 95% tank capacity to prevent overfilling and environmental hazards.

Similar Contracts

Same NAICS industry code

Elevator Preventive Maintenance and Major Repairs ServicesThis contract, solicitation W912CN-26-Q-A031, seeks a Firm-Fixed-Price provider to deliver comprehensive elevator and chairlift preventive maintenance, repair, testing, inspection, and certification services across U.S. Army installations on Oahu, Hawaii, primarily at Schofield Barracks. The work is non-personal services in nature, meaning the contractor operates independently without government supervision, but remains fully accountable for meeting all standards outlined in the Performance Work Statement, including compliance with ASME A17.1, ASME A18.1, OSHA, and all federal, state, and local regulations. The contract covers a base period from September 1, 2026, through August 31, 2027, with four optional one-year periods and a potential six-month extension, creating a possible performance period extending to August 2031. The scope includes maintaining a detailed inventory of elevators and chairlifts across UPH barracks and non-UPH administrative facilities, requiring adherence to manufacturer-recommended preventive maintenance schedules and annual test dates as documented in the Technical Exhibits. The contractor must supply all personnel, tools, equipment, parts, and transportation necessary to perform these services, including providing all replacement parts for both Preventive Maintenance Orders and Demand Maintenance Orders. Offerors must submit a complete, non-partial quotation that includes detailed general information such as UEI, CAGE code, SAM.gov registration status, business size classification, and payment terms; a technically acceptable narrative not exceeding ten pages demonstrating understanding of the scope, including certification documentation for the Project Manager and all key technicians—specifically valid Hawaii elevator mechanic licenses and NAESAs Qualified Elevator Inspector certifications—a staffing and management plan capable of handling concurrent task orders across the Garrison, a baseline preventive maintenance schedule mapped to historical test dates, and at least two relevant project examples from the past three years involving similar elevator and chairlift maintenance without modernization. Pricing must be submitted for all contract line items except CLINs 0008–0009 and their options (now renumbered to X010 and X011), which are designated Not-Separately-Priced (NSP) and will be negotiated on a firm-fixed-price basis at the task order level. The total evaluated price includes the base period, all four option years, and the potential six-month extension under FAR 52.217-8, with one-half of the option price added

0413 Aq Hq Rco-Hi

POSTED

about 4 hours ago

DEADLINE

Security fence at Coast Guard Air Station Clearwater FloridaThis solicitation is for a firm fixed-price construction contract to remove approximately 400 feet of existing fence and install approximately 270 feet of new 8-foot industrial fencing with barbed wire at the USCG Air Station Clearwater in Florida. The project includes the installation of three gates: a large non-powered gate with a cipher lock, a 60-inch-wide swing gate suitable for commercial lawn mower access, and a 26-foot-wide powered sliding gate with an electronic pin pad for entry and exit. All existing fence posts and concrete footings must be completely removed and the areas backfilled. The contractor is responsible for coordinating vehicle relocation near the fence with the unit, and the new fence will not extend beyond a small bridge at the lot corner. Work must be performed Monday through Friday between 8 a.m. and 3 p.m., with no weekend or holiday work authorized. The solicitation is a total small business set-aside under NAICS code 238990 with a size standard of $19 million in annual receipts, and only vendors registered in SAM with an active status and the correct NAICS code are eligible to respond. Quotes are due by 3 p.m. on 14 August 2026 and must be emailed to Jerry.Lopez@uscg.mil. The government will award based on lowest price, technically acceptable criteria, with anticipated award on 28 August 2026 and performance beginning no later than 10 business days after award. A required site visit was held on 29 July 2026, and vendors must ensure personnel have government-issued ID for access. All work must comply with applicable FAR clauses including 52.236-2 on differing site conditions, 52.236-5 on material and workmanship (materials must be new and of suitable grade), 52.236-7 on permits and responsibilities, and 52.236-13 on accident prevention and OSHA compliance. Wage determination FL20260266 mandates Davis-Bacon prevailing wages for laborers and mechanics, and contractors must flow these requirements down to all subcontractors. Additionally, the contract incorporates clauses addressing DEI discrimination, prohibition of contracts with corporate expatriates, and compliance with federal labor standards including paid sick leave and federal contractor minimum wage requirements. Contractors must submit tax ID and UEI information and are subject to default provisions if work is not

Base MIAMI(00028)

POSTED

about 4 hours ago

DEADLINE

5660--DESIGN-BUILD CONSTRUCTION FOR UPGRADE PERIMETER SECURITY VA MEDICAL CENTER (VAMC), MARTINSBURG, WVThe Department of Veterans Affairs, through its Office of Construction & Facilities Management, is seeking a Design-Build contractor to upgrade perimeter security at the Capital Region Readiness Center located at the VA Medical Center in Martinsburg, West Virginia. This 100% Service-Disabled Veteran-Owned Small Business set-aside solicitation requires the contractor to design and install a comprehensive perimeter security system including fencing with anti-climb and anti-ram features, guard gates, bollards, and anti-ram vehicle barriers in strict compliance with the VA Physical Security and Resiliency Design Manual and VA Technical Information Library. The work encompasses full site verification including surveying and underground utility detection, along with all labor, materials, equipment, and installation necessary to meet federal security standards. Proposals must be submitted in two electronic PDF volumes—Volume I containing administrative and contractual documents, and Volume II detailing technical approach, past performance, and key personnel—following strict formatting, naming, and page limitations to avoid rejection. All submissions must be emailed to designated VA contracting officials by the deadline, with no exceptions to solicitation terms permitted within proposal volumes. Volume II is structured into three evaluation factors ranked in descending importance: Organizational/Technical Approach & Schedule, Past Performance, and Key Personnel. For the technical approach, offerors must demonstrate a clear, concise plan for managing design and construction activities with a detailed organizational chart, subcontractor roles and teaming agreements, and an enforceable quality control system including inspection and submittal registration controls. The contractor must perform at least 20% of the total work with its own forces as mandated by FAR 52.236-1. Past performance must include two to five recent projects of similar scope and complexity, each valued over $1 million, with verified experience in perimeter fencing, anti-ram barriers, and bollard systems, along with documented work on electrical substations and generator yards. Offers must provide completed Past Performance Questionnaires or CPARS evaluations and clearly state subcontractor contributions and teaming commitments. Key personnel requirements are stringent: the Project Superintendent and Project Manager must each have ten years of construction experience, the CQC System Manager must hold a relevant degree or PE license with four years of experience or eight years of on-site experience including one year in quality control, and the Site Safety and Health Officer must meet EM 385-1-1 standards with ten years of safety experience, five years in heavy construction on electrical facilities, OSHA 30-hour certification, and 24 hours of

Office Of Construction & Facilities Management (36C10F)

POSTED

about 4 hours ago

DEADLINE

Repair Parking Area at the Grayling Air to Ground RangeThis solicitation, numbered W50S8626BA003, is a Firm Fixed Price invitation for bids issued under the Revolutionary FAR Overhaul to acquire commercial construction services for the repair of the Range Parking Area at the Grayling Air-to-Ground Gunnery Range in Frederic, Michigan. The requirement is set aside 100% for small businesses under NAICS code 238990, with an estimated contract value between $500,000 and $1,000,000. The contractor must furnish all personnel, equipment, materials, supervision, and quality control to complete the work in strict accordance with engineering design drawings and specifications, including construction of parking areas, erosion control systems, and stormwater infrastructure. Delivery and acceptance of the completed work will occur at the Grayling site, though all bids must be physically submitted by the deadline of 13 August 2026 at 11:00 AM Local Time to the bid box located at Alpena CRTC, Building 2022, as electronic submissions are prohibited. The period of performance is 365 calendar days after issuance of the Notice to Proceed, with an initial work start anticipated in August 2026. A single, mandatory site visit is scheduled for 28 July 2026 at the Grayling range; no other visits will be permitted. All questions must be submitted in writing by 5 August 2026 and will be answered via SAM.gov. The contract incorporates numerous FAR and DFARS clauses modified under Deviation 2026-O0038, including requirements for security compliance, quality control, site safety, and material standards such as MIL-STD-129 and MIL-STD-130, which dictate unique item identification via data matrix symbols and weather-protected labeling. Key personnel—including a project manager, site superintendent, quality control manager, and safety manager—must meet stringent experience criteria, and substitutions require prior written approval. All personnel must be U.S. citizens or legal residents, pass criminal background checks, carry government-issued photo identification, and comply with HSPD-12 and FIPS PUB 201 standards, including completion of AT Level I Awareness Training for access to National Guard installations. Contractors are subject to vehicle and personal searches, strict access controls, and mandatory safety attire while on-site. Invoicing must be conducted exclusively through WAWF, with

W7NF Uspfo Activity Miang Crtc

POSTED

about 4 hours ago

DEADLINE

Installation of Electric High Tensile Wire FencingThis solicitation, identified as 1232SA26Q0939, is a combined synopsis and request for quotation issued under FAR Part 12 for the installation of electric high tensile wire fencing at the Prairie du Sac Agricultural Research Station in Wisconsin. The acquisition is a total small business set-aside under NAICS code 238990, with a small business size standard of $19 million, and is intended for award as a firm-fixed-price purchase order with an estimated value between $250,000 and $500,000. The work involves preparing and fencing Fields 1–3 as the base requirement, along with three optional areas that may be exercised after award, each tied to a separate contract line item number. The scope includes demolition and disposal of all existing fencing and debris, installation of five-strand perimeter fencing and three-strand interior fencing using wooden posts, and compliance with detailed specifications for hog wire fencing, electrical grounding systems, and utility coordination. Shop drawings and quality control documentation must be submitted for approval prior to installation, and all work must conform to specific material standards, with substitutions requiring prior written approval from the Contracting Officer. The solicitation is evaluated using the Lowest Priced Technically Acceptable (LPTA) method, where offerors must pass mandatory technical acceptability and past performance gates before price is considered. Technical acceptability requires full compliance with the Statement of Work, specifications, and all contract clauses, while past performance is deemed unacceptable if any negative evaluations exist within the last five years, including terminations for default, marginal or unsatisfactory ratings exceeding 10% in any CPARS category, or unsatisfactory reference responses. Quotations must be submitted via email to the designated USDA address by 10:00 AM local time on August 7, 2026, and must include a transmittal letter with the offeror’s SAM UEI, tax ID, and point of contact. A completed SF 24 bid bond is required, and selected offerors must be prepared to furnish performance and payment bonds. The contract includes numerous FAR and AGAR clauses covering labor standards, wage requirements, whistleblower protections, anti-trafficking, cybersecurity, and contract administration, with additional requirements for on-site supervision, safety compliance with OSHA, certified payroll records, and adherence to a 180-day performance window following award. All invoices must be submitted in original and copy form to both

USDA Ars Afm Apd

POSTED

about 4 hours ago

DEADLINE

RFP 26-19769-YB Services for Various Mechanical, Electrical, Welding, and MachinistThe City of Lubbock, Texas, is soliciting services for a broad range of mechanical, electrical, welding, and machinist work under RFP 26-19769-YB. The opportunity is open to qualified vendors and is targeted toward state, local, and educational government entities, with responses due by August 12, 2026. All work is expected to be performed within Lubbock, Texas. The solicitation is managed by the city’s purchasing department, with primary contact points including Yolanda Busby and Marta Alvarez, the Director of Purchasing, along with Teofilo Flores as the Assistant Director. Interested parties must submit proposals through the Texas SmartBuy portal before the deadline, and all communications should be directed to the provided email addresses and phone numbers. The solicitation does not specify a set-aside classification or NAICS code, leaving eligibility open to all qualified responders.

CITY OF LUBBOCK

POSTED

about 19 hours ago

DEADLINE

General Subcontractor Management and CoordinationThe contract entails comprehensive oversight and coordination of multiple subcontractors across various operational domains including scheduling, logistics, safety, and quality control. The scope requires active management to ensure seamless integration of subcontractor activities, timely project progression, adherence to safety protocols, and consistent delivery of high-quality work standards. The effort is centered around maintaining alignment among all parties involved to meet project objectives without direct supervision of the primary contractor. This opportunity is classified under NAICS code 238990 and is open for responses until August 24, 2026. It is issued by the State of Utah under a subcontract arrangement, with no set-aside provisions specified. All work is expected to be performed within Utah, though exact location details are not provided. Interested parties must engage through the designated online portal to submit proposals by the deadline.

POSTED

about 19 hours ago

DEADLINE

Selective Demolition and Site PreparationThe contract titled Selective Demolition and Site Preparation is a subcontract issued by the Cobb County Board of Education in Georgia, aimed at removing existing building components and systems to ready the site for new mechanical, electrical, and architectural installations. The work involves carefully dismantling and extracting outdated or incompatible infrastructure to ensure a clean, safe, and code-compliant foundation for upcoming updates, with all activities aligned to the NAICS code 238990 for other specialized construction services. The solicitation was posted on July 28, 2026, and responses are due by September 2, 2026, indicating a targeted timeline for contractor selection and project initiation. The location of performance is unspecified, but the work is understood to occur at properties under the jurisdiction of the Cobb County Board of Education. No set-aside provisions or specific point of contact details are provided, and the contract can be viewed via the provided state procurement portal link.

Cobb County Board of Education

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Specialty Pool Fixture Handling and ReinstallationThe contract involves the careful removal, secure storage, and precise reinstallation of specialized pool fixtures including diving boards, starting blocks, handrails, drain grates, and pole holes in preparation for and following flooring renovation work. All tasks must be executed with attention to structural integrity and safety, ensuring that each component is handled to prevent damage and restored to its original functional condition. The work requires skilled labor familiar with pool infrastructure and the unique challenges of preserving and reinstalling fixed aquatic equipment during construction activities. This subcontract opportunity is issued under NAICS code 238990 and is open for responses until August 14, 2026. The contracting entity is listed as Utah, with no specific agency or office address provided. The opportunity is posted on the Utah BonfireHub platform and is not classified under any set-aside program. Bidders must be prepared to adhere to precise handling protocols and timeline requirements to meet the project’s renovation schedule without disrupting pool operations beyond the designated work window.

POSTED

about 21 hours ago

DEADLINE

Facilities Specialty Service Providers RFPThe Harris Center for Mental Health and IDD is issuing a Request for Proposals to engage Facilities Specialty Service Providers for a range of maintenance and construction services including electrical, painting, plumbing, flooring, door hardware and locksmith work, paving and striping, doors, fence installation and repair, restoration and waterproofing, roofing, HVAC, general contracting, environmental services, and event equipment rental. The solicitation, identified as FY26-0478, was posted on July 28, 2026, and all specifications are available on the center’s website and through its Bonfire procurement portal. A non-mandatory vendor conference is scheduled for August 6, 2026, at the center’s headquarters in Houston, Texas, and all questions from interested parties must be submitted by the same day. Proposals are due by 10:00 a.m. on August 20, 2026, and must be submitted via the designated online platform. The center retains full discretion to reject any or all proposals, waive minor procedural irregularities, and is not required to accept the lowest bid, prioritizing overall best value and alignment with operational needs. Primary point of contact for inquiries is Frances Otto, with additional support from Nina Cook and Sharon Brauner in purchasing.

HARRIS CENTER FOR MENTAL HEALTH

POSTED

about 23 hours ago

DEADLINE

General Demolition and Site ClearingThe contract titled General Demolition and Site Clearing covers the complete removal of existing structures and debris, followed by site grading and preparation activities necessary to support new construction. Work is to be performed at a location in Tracy, California, with a ZIP code of 95304-5000, and falls under the NAICS code 238990 for other construction support activities. This is a subcontract opportunity issued by the Department of Defense under the Maritime Supply Chain organization, with a posted date of July 28, 2026, and a response deadline of August 10, 2026. All activities must comply with federal and local regulations regarding demolition, environmental safety, and site disturbance, and the contractor is expected to deliver a clean, leveled, and ready-to-build site upon completion. The solicitation is accessible via the DIBBS platform for qualified subcontractors to respond before the deadline.

MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

On-Call Fencing Construction ServicesThe City of Roseville is seeking qualified contractors for an on-call fencing construction services contract covering installation, repair, and replacement of multiple fencing types including wood, chain link, wrought iron, concrete split rail, and post and cable barriers across city properties. The selected contractor must provide all labor, materials, and equipment, and is responsible for comprehensive project management including field investigations, quoting using pre-approved unit prices, communicating with residents, implementing traffic control measures, removing and disposing of existing materials, and ensuring thorough site cleanup. All work must comply with City standards and prevailing wage requirements. The contract is multi-year and intended for flexible, as-needed deployment throughout Roseville, California, with performance expected to meet rigorous public infrastructure norms. Proposals must be submitted by August 5, 2026, and inquiries can be directed to Eric Dexter, the primary point of contact at cityclerkroseville@roseville.ca.us. The solicitation, identified by number 20260727041, falls under NAICS code 238990 and is issued by the City of Roseville in California. Interested parties should review the complete solicitation details via the provided online portal to ensure full compliance with submission guidelines and contract expectations.

City of Roseville

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)

Same awarding agency

Vancouver VAMC Laundry TrailersThe Department of Veterans Affairs is soliciting three 45' dry van laundry trailers under solicitation number 36C26026Q0847, a Small Business Set Aside for total small business participation, with a NAICS code of 336212 indicating ship and boat building with a size standard of 1,000 employees. The solicitation closes on August 4, 2026, at 1700 EDT, with delivery required within 90 days after award to the Vancouver VA Medical Center at 1601 E. Fourth Plain Blvd, Vancouver, WA 98661 under FOB Destination terms. The contract form used is the SF-1449, indicating a commercial item acquisition likely under a Firm-Fixed-Price structure, though the total estimated value is not stated as pricing fields remain blank. The offeror must comply with multiple federal regulations including the Buy American Act, requiring certification of domestic content for end products and critical components, and must prohibit use of covered telecommunications equipment from foreign entities such as Huawei, ZTE, and Kaspersky Lab under a deviation clause, with immediate removal obligations upon discovery. Additionally, the contract prohibits racially or ethnically discriminatory DEI practices and requires flow-down of this clause to all subcontractors. Payment will be processed electronically through the VA's approved platform, Tungsten Network, per VAAR Clause 852.232-72, and invoicing must adhere to electronic submission guidelines. Evaluation will consider price, technical compliance, and past performance without discussions, and the government retains the right to accept non-lowest offers. Offerors must submit a completed SF-1449 with UEI and CAGE code information, affirm size status as small business, and provide certification of compliance with all applicable clauses including OFAC sanctions prohibitions. The Contracting Officer’s Representative and COTR are not identified; all correspondence must be directed to the Network Contracting Office 20. No specific packaging, labeling, or barcoding standards are detailed, though traceability elements like manufacturer part numbers and OEM codes are required. Inspection and acceptance will occur at the delivery site, with the government retaining authority to reject nonconforming items.

Truck Trailer Manufacturing

POSTED

about 4 hours ago

DEADLINE

8145--Climate Controlled Storage Conex - Boise VA Medical Center Brand Name or EqualThe Department of Veterans Affairs, through the NCO20 office, is conducting market research to determine the availability of qualified small businesses, including Service-Disabled Veteran Owned, Veteran Owned, Women Owned, and other Small Business Manufacturers, as well as large businesses, capable of supplying a single 20ft climate-controlled storage container under a firm-fixed price supply contract. The requirement is for a brand name or equal product, specifically a new, one-trip Corten steel container with exact dimensions of 20ft long by 8ft wide and a height no greater than 10ft, featuring heavy-duty neutral exterior paint with a minimum five-year service life, marine-grade wood flooring with forklift tracks, interior LED lighting, GFCI outlets on each interior wall, and 1-inch styrofoam insulation on walls plus two layers on the ceiling. The unit must include a 15,000 BTU PTAC HVAC system with an energy efficiency ratio of 9.5 or higher, a digital thermostat, and a minimum 60A disconnect feeding a 125A interior electrical panel. The container must have a secure steel cargo door on the end opposite the main access door and must be under four years old with no damage. The SBA Non-Manufacturer Rule applies, and no waiver will be sought, meaning only authorized distributors or resellers of the manufacturer can respond if they do not manufacture the product themselves. All items must be new, with no used or refurbished equipment accepted, and the manufacturer must be Falcon Structures unless an equal product is submitted. Responses must include full company details, UEI, SBA certifications if applicable, proof of authorization from the manufacturer if not the producer, a courtesy quote for price reasonableness, and detailed documentation demonstrating that any “equal” product meets or exceeds every specified salient characteristic, including brand name, model number, and supporting literature. The country of origin for all components must be declared, and if the product is foreign-made, respondents must indicate whether it exceeds 60% domestic content, though this is waived for COTS items. Respondents must also identify all manufacturers involved and, if they qualify as a nonmanufacturer under SBA regulations, provide a narrative confirming they meet the criteria of having fewer than 500 employees, primarily engaging in wholesale or retail, taking ownership of the item, and supplying a U.S.-made end product from a small business manufacturer. Participation is voluntary, with no reimbursement for response costs, and submission does not

Prefabricated Metal Building and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

Boiler Plant MaintenanceThe contract solicitation for Boiler Plant Maintenance at the White City VA Southern Oregon Rehabilitation Center and Clinic is a total set-aside exclusively for certified Service-Disabled Veteran-Owned Small Businesses under NAICS code 561210, with the solicitation number 36C26026Q0702 issued by the Department of Veterans Affairs through the 260-NETWORK Contract Office 20 in Vancouver, WA. The scope of work requires monthly comprehensive maintenance of the boiler plant water system, including all necessary chemicals, test kits, reagents, corrosion coupons, and technical advisory services to ensure a 99 percent uptime, with strict adherence to FDA guidelines under CFR 21, 173.310 and compliance with all applicable local, state, and federal water pollution regulations and EPA registration. All chemical containers must be properly labeled and returnable, with Material Safety Data Sheets submitted for every chemical used, and on-site storage must include secondary containment. The contract includes a base year running from September 1, 2026, through August 31, 2027, and up to four one-year option periods extending through August 31, 2031. Evaluation will be based solely on price, with the Government evaluating total cost including all options, and no discussions will be conducted—offerors must submit their most advantageous terms initially. The contract mandates a fully qualified on-site contract manager who serves as the primary point of contact, available to respond within one business day, even during non-business hours. All personnel must wear identification badges at all times, check in and out at Building 229, and are considered employees of the contractor, not VA personnel. Invoicing must be submitted monthly in arrears through electronic means per VAAR Clause 852.232-72, with each invoice requiring the contract number, date of service, itemized charges, and authorizing official, all processed under the Prompt Payment Act. The contract incorporates numerous Federal Acquisition Regulation clauses including 52.212-4 for commercial services, 52.217-8 and 52.217-9 for optional extensions, 52.222-90 addressing DEI discrimination, 52.240-91 for security prohibitions, and 52.203-17 and 52.203-19

Facilities Support Services

POSTED

about 4 hours ago

DEADLINE

in about 22 hours

UST Equipment Supply (Overfill Valves and Sump Sensors)The contract involves the supply of 71SO-410C OPW Overfill Valves and 794380-208 VR TLS Sump Sensors, with full logistics, delivery, and compliance documentation required for shipment to Walla Walla, WA, specifically to meet regulatory and operational needs at the location. All items must be delivered in accordance with technical specifications and accompanied by necessary certifications to ensure compliance with applicable standards. The procurement is under a Service-Disabled Veteran-Owned Small Business Set-Aside, indicating eligibility is restricted to businesses owned and controlled by service-disabled veterans, and the NAICS code 423690 categorizes this transaction under Other Miscellaneous Durable Goods Merchant Wholesalers. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, at 2:00 PM, allowing interested contractors a limited window to submit proposals. The contracting office is the 260-NETWORK Contract Office 20 under the Department of Veterans Affairs, and performance is strictly tied to the delivery destination in Walla Walla, Washington, with a ZIP code of 99362, ensuring all contractual obligations converge at this specified site.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Underground Storage Tank System Compliance and Risk Mitigation ServicesThe contract titled Undergound Storage Tank System Compliance and Risk Mitigation Services requires the provider to deliver compliance verification, safety inspections, and environmental risk management services specifically for the installation of underground storage tank systems. All work must strictly adhere to federal and state regulatory standards to ensure environmental safety and legal compliance throughout the installation process. The scope is focused on mitigating risks associated with tank installation, including proper handling of hazardous materials, adherence to containment protocols, and documentation of inspections to confirm regulatory alignment. This is a subcontract awarded under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside, classified under NAICS code 541620 for environmental consulting services. The opportunity was posted on July 28, 2026, with a response deadline of August 10, 2026. Performance is required at Walla Walla, Washington, 99362, under the purview of the Department of Veterans Affairs through its 260-NETWORK Contract Office 20. The set-aside status restricts eligibility to businesses owned and controlled by service-disabled veterans, ensuring contracting opportunities for this designated group within the federal procurement framework.

Environmental Consulting Services

POSTED

DEADLINE

UST Sump Sensor Installation and IntegrationThe contract requires the installation and integration of a 794380-208 VR TLS Sump Sensor into an existing Underground Storage Tank monitoring system, with specific tasks including deactivating the L3 sensor alarm and conducting verification testing to ensure proper functionality and system compatibility. The work must be performed at the designated location in Walla Walla, Washington, with a zip code of 99362, and the effort is classified as a subcontract under a Service-Disabled Veteran-Owned Small Business set-aside, meaning only eligible SDVOSB firms may submit proposals. The North American Industry Classification System code for this effort is 334510, indicating it falls within the category of other sensing instrument manufacturing. The opportunity was posted on July 28, 2026, with a response deadline of August 10, 2026, at 2:00 PM, and is managed by the Department of Veterans Affairs through the 260-NETWORK Contract Office 20.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Transformer Cooling Fluid SupplyThe contract requires the supply of manufacturer-specified cooling liquids, including mineral oil, in precise volumes tailored to each transformer model, ensuring compatibility and optimal thermal performance. All deliveries must be accompanied by comprehensive technical and safety documentation to verify compliance with industry standards and operational requirements. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under FAR 19.14, restricting eligibility to businesses owned and controlled by service-disabled veterans. The NAICS code 424690 classifies the procurement within the wholesale trade sector for miscellaneous durable goods, specifically pertaining to the distribution of industrial equipment and supplies. Performance is mandated at White City, Oregon, with a response deadline of August 10, 2026, and the solicitation was posted on July 28, 2026, under the 260-NETWORK Contract Office 20 (36C260), part of the Department of Veterans Affairs.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

DEADLINE

Transformer Site Logistics & Coordination SupportThe contract requires management of on-site logistics for 28 transformer locations, with all work coordinated during standard VA business hours. The contractor must oversee access to these sites and provide advance notice for any planned power shutdowns to ensure minimal disruption to operations. This effort is critical to maintaining the integrity and functionality of the transformer infrastructure under the Department of Veterans Affairs’ network. The solicitation is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside, adhering to FAR 19.14, and is classified under NAICS code 541611 for management consulting services. Performance is localized to White City, Oregon, with a posting date of July 28, 2026, and a response deadline of August 10, 2026. The contract is structured as a subcontract and falls under the purview of the 260-NETWORK Contract Office 20, with no additional point of contact details provided.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Transformer Cooling Liquid Replacement & Fluid ManagementThe contract involves replacing cooling liquid in up to two transformers, requiring full management of the fluid including testing, proper disposal, and recycling in compliance with all applicable environmental regulations. All work must be documented thoroughly to meet regulatory standards and ensure accountability throughout the process. The project is classified as a subcontract under a Service-Disabled Veteran-Owned Small Business Set-Aside, reserved exclusively for businesses certified under this category. The North American Industry Classification System code is 562910, indicating it falls under waste collection, treatment, and disposal services. Performance is required at a location in White City, Oregon, with a zip code of 97503, and the contract is managed by the Department of Veterans Affairs through the 260-NETWORK Contract Office 20. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, at 2:00 PM Eastern Time.

Remediation Services

POSTED

DEADLINE

Transformer Preventive Maintenance & CleaningThe contract requires the performance of comprehensive preventive maintenance on 28 liquid-cooled medium voltage transformers, including exterior cleaning, visual inspection, infrared thermal testing, and cooling liquid level and condition checks to ensure optimal operational integrity. All work must be conducted at the specified location in White City, Oregon, with a zip code of 97503, and must adhere to industry-standard protocols for electrical infrastructure maintenance. The services are essential for maintaining reliability and safety within the Department of Veterans Affairs’ facility infrastructure. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), as defined under FAR 19.14, and is classified under NAICS code 541330 for other scientific and technical consulting services. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, at 2:00 PM. The contracting office is the 260-NETWORK Contract Office 20 under the Department of Veterans Affairs, and all work must be performed by an eligible SDVOSB concern to comply with federal set-aside regulations.

Engineering Services

POSTED

DEADLINE

Warranty and Technical Support ServicesThe contract calls for one-year warranty and technical support services focused on defective units, encompassing comprehensive troubleshooting, repairs, replacements, and VA-compliant data sanitization to ensure secure handling of sensitive information. All services must adhere to federal standards for data protection and be performed in alignment with Department of Veterans Affairs requirements. The scope is limited to a single year and applies to units covered under the warranty terms, with an emphasis on timely resolution and regulatory compliance. This subcontract is a Small Business Set Aside, total, meaning only small businesses are eligible to compete, and it is classified under NAICS code 811211, which pertains to electronic and precision equipment repair and maintenance. The opportunity was posted on July 28, 2026, with responses due by August 15, 2026, and is managed by the 260-NETWORK Contract Office 20 within the Department of Veterans Affairs. Performance location details are unspecified, but all work must meet VA-specific data sanitization protocols, and the contract is accessible through the SAM.gov portal for interested small businesses.

Consumer Electronics Repair and Maintenance

POSTED

DEADLINE

Training Content Development and DeliveryThis contract requires the development and delivery of virtual or video-based training modules for VAMC staff focused on the proper use, routine maintenance, and data management of fit testing systems. The training must be designed to ensure staff can consistently and correctly operate equipment, perform necessary upkeep, and accurately handle associated data in compliance with protocol. The effort is structured as a subcontract under a Small Business Set Aside designation, meaning only small businesses are eligible to compete. The North American Industry Classification System code 611430 indicates this falls under support services for educational institutions, specifically emphasizing instructional content design and delivery. The solicitation was posted on July 28, 2026, with responses due by August 15, 2026. The contracting activity is under the Department of Veterans Affairs, specifically the 260-NETWORK Contract Office 20, and the work is to be performed remotely in support of VAMC locations nationwide.

Professional and Management Development Training

POSTED

DEADLINE