Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

99--RECEIVER TRANSMITTE, IN REPAIR/MODIFICATION OF

Active
N0038326RSB22Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract solicitation, identified by NSN 0R-0098-LLZ98S445-CC and solicitation number N0038326RSB22, seeks a sole source procurement for 10 units of a receiver transmitter to be repaired or modified, with delivery terms set at FOB origin. The Government has determined it lacks sufficient, accurate, or legible data to procure from any other source, making this requirement exclusively available to the current provider. Items under this acquisition are subject to both the World Trade Organization Government Procurement Agreement and applicable Free Trade Agreements, requiring compliance with relevant international procurement rules. Government Source Approval is mandatory prior to award, and offerors who are not pre-approved must submit complete documentation as outlined in the NAVSUP WSS Source Approval Brochure; failure to include all required information will result in disqualification. The solicitation was posted on July 24, 2026, with proposals due by September 8, 2026, and is issued by the Naval Supply Systems Command Weapon Systems Support office located in Philadelphia, Pennsylvania. The contract becomes effective upon the Government’s acceptance of the contractor’s proposal through electronic transmission, mail, or fax, and all inquiries should be directed to the listed point of contact.

General Info

Sole source procurement for 10 receiver transmitters, FOB origin, due September 8, 2026, Naval Supply Systems Command.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

811210 - Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
CODY P. CAMERON
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NSN 0R-0098-LLZ98S445-CC, TDP VER 001, IAW REF NR 1369896-0001, QTY 10 EA, DELIVERY FOB ORIGIN. This is a sole source requirement. The Government physically does not have in its possession sufficient, accurate, or legible data to contract with other than the current source. One or more of the items under this acquisition is subject to Free Trade Agreements. (FAR 52.225-3). One or more of the items under this acquisition is subject to the World Trade Organization Government Procurement Agreement and Free Trade Agreements. (FAR 52.225-5) These items require Government Source Approval prior to award. If you are not an approved source, you must submit, together with your proposal, the information detailed in the NAVSUP WSS Source Approval Brochure which can be obtained on the internet at https: //www.navsup.navy.mil/navsup/ourteam/navsupwss/business_opps. Offers received which fail to provide all data required by the source approval brochure will not be considered for award under this solicitation. For information or questions regarding this notice, please contact cody.p.cameron@navy.mil. This contract/delivery order/purchase order/modification is issued by the Government when deposited in the mail, transmitted by facsimile or sent by any electronic commerce method, including email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to issue this contract/delivery order/purchase order/modification.

Similar Contracts

Same NAICS industry code

NAICS: 811210
New
SLED
Pure Storage Support 26-2The City of Waterbury is inviting sealed bids for Pure Storage Support 26-2 under Solicitation Number 8898, an ITB procurement open for bidding until August 12, 2026, at 11:30 a.m. Bids must be submitted to the Director of Purchasing at City Hall, 235 Grand Street, Waterbury, CT, and will be publicly opened at that time; late submissions will not be accepted. The bid was posted on July 24, 2026, with a clarification deadline of July 31, 2026, at 2:00 p.m., and there is no prebid meeting scheduled. The contract is for IT support services related to Pure Storage systems, with the city acting as the procuring entity under the SLED government classification. All correspondence should be directed to mmccauley@waterburyct.org, and bids must be submitted in U.S. dollars. The place of performance is in Connecticut, and the solicitation is currently open with 18 days remaining until closing.
City of Waterbury

POSTED

about 8 hours ago

DEADLINE

in 19 days
View Details
NAICS: 811210
New
SLED
SP27-RADARLIDAR-X66 Radar and Lidar Equip and CalibrationThe Massachusetts State Police is soliciting qualified vendors to supply radar and lidar equipment that is not currently available under existing statewide contracts, along with associated calibration and repair services. This procurement is open to vendors who can meet the technical and service requirements necessary to support law enforcement traffic enforcement operations across the state. The solicitation, titled SP27-RADARLIDAR-X66 Radar and Lidar Equip and Calibration, is issued under solicitation number BD-27-1084-POLTR-TRAFF-131499 and was posted on July 24, 2026. Responses are due by February 28, 2034, providing a long window for vendors to prepare and submit proposals. The contract will be administered by the Massachusetts Department of Public Safety’s Traffic Programs office located in Framingham, with Dianne Miller serving as the primary point of contact. All equipment and services must be performance-ready at the specified place of performance in Framingham, Massachusetts, and vendors are expected to comply with all applicable state and federal standards for law enforcement-grade traffic monitoring technologies. The procurement does not specify a set-aside type, indicating it is open to all eligible vendors regardless of business size or certification status. Vendors must ensure their submissions address both equipment specifications and ongoing service commitments including calibration accuracy, timely repairs, and technical support.
POLTRAF - Traffic Programs

POSTED

about 8 hours ago

DEADLINE

in over 7 years
View Details
NAICS: 811210
New
Federal
J065-- RedHat OS Service Contract -w/wd, B+4, POP 10/1/2026 - 9/30/2031The contract seeks services for Red Hat operating system support under a Service-Disabled Veteran-Owned Small Business Set Aside, with performance based in Phoenix, Arizona, and the offering office located in Gilbert, Arizona. The work spans a five-year period from October 1, 2026, through September 30, 2031, and falls under NAICS code 811210 for computer repair and maintenance services. The solicitation was posted on July 24, 2026, with responses due by July 31, 2026, and is managed by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. The primary point of contact is Contract Specialist Jessica Brooks, reachable via email and phone provided, with all inquiries directed through the official SAM.gov portal linked in the posting.
262-NETWORK Contract Office 22 (36C262)

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811210
New
Federal
Preventive Maintenance for Gatan BioContinuum system and the Gatan Alpine Vista direct electron detector, including supporting equipmentThe contract solicitation pertains to preventive maintenance services for the Gatan BioContinuum system and the Gatan Alpine Vista direct electron detector, along with associated supporting equipment, ensuring optimal operational performance and longevity of the advanced imaging infrastructure. The work is required to be performed at a designated location in Durham, North Carolina, 27709, with all maintenance activities aligned to preserve system integrity and compliance with technical specifications. The National Institutes of Health, under the Department of Health and Human Services, is the contracting agency, and inquiries should be directed to Francisca K. Wagstaff at wagstaff@nih.gov. The solicitation, numbered 75N98026Q00871, was posted on July 24, 2026, and responses are due by August 10, 2026. This is a combined solicitation with no set-aside designation, classified under NAICS code 811210 for other administrative and general support services, and is open to all qualified vendors without restrictions based on size or status.
National Institutes Of Health Olao

POSTED

about 10 hours ago

DEADLINE

in 16 days
View Details
NAICS: 811210
New
Federal
H--NP3 MC-ICP-MS Maintenance ServicesThe United States Geological Survey is seeking market information to support the procurement of an annual preventative maintenance and service contract for its Nu Instrument NP2 MC-ICP-MS with NP3 upgrade, located at the Denver Federal Center in Lakewood, Colorado. The instrument is critical to high-precision isotope ratio measurements supporting federal research initiatives related to critical minerals, ore formation, and collaborations with agencies such as EPA, NASA, and DOE, as well as academic institutions. The contract requires comprehensive service coverage including annual preventative maintenance visits, unlimited unscheduled emergency service within five business days, and 24/7 telephone technical support during business days. The contractor must employ Nu Instrument–trained personnel, supply factory-approved parts at no additional cost to the government, ensure parts are shipped within 48 hours of diagnosis, provide all necessary software updates, and cover labor and travel expenses. External consumables such as torches, cones, rotary pumps, and chillers are explicitly excluded from coverage. The requirement is governed under NAICS code 811210 with a size standard of $34 million, and the government is evaluating responses to determine whether the acquisition will be set aside for small businesses or conducted through full and open competition. Interested parties must submit a tailored capability statement demonstrating their ability to meet all specified technical requirements, clearly identify their business size category including any socio-economic designations, provide active SAM.gov registration details, and include a point of contact with email. Responses must be submitted by July 28, 2026, at 2:30 p.m. Mountain Daylight Time via email to the designated contracting officer. This is a sources sought notice only, not a solicitation, and participation is voluntary with no compensation for costs incurred by respondents. No feedback, award decisions, or notifications will be provided, and the government will use the information gathered solely to assess market capability and inform future procurement strategy.
Ofc Of Acquisition Grants-Denver

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details
NAICS: 811210
New
Federal
Repair and Calibration of the following equipment: T342, T334 and T229AThis solicitation, RFQ No. 142082-26-0462, is a full small business set-aside under NAICS code 811210 with a $34.0 million size standard, issued under FAR Parts 12 and 13 using simplified acquisition procedures for the repair and calibration of specific electronic equipment: 12 units of the IFR Model 1200 Super S spectrum analyzer, 2 digital multimeters (Fluke 189), and 2 HP 8648C RF signal generators. The contract will be awarded as a firm-fixed price purchase order, with all work required to restore equipment to like-new condition in full compliance with original manufacturer specifications and tolerances, including good physical appearance. Non-conforming units will be returned for rework at no additional cost to the government, and vendors must package all repaired items in containers capable of withstanding shock and vibration across all modes of transport—ship, rail, truck, and aircraft—to prevent any physical, electrical, mechanical, or cosmetic damage. The place of acceptance is the National Reconditioning Center in Grandview, Missouri, and all pricing must be all-inclusive, covering return shipping and any applicable discounts, evaluated as a single total cost across all line items. Evaluation will be based on a best-value trade-off, with delivery terms slightly more important than price. Offerors must submit a detailed production plan outlining the expected timeframe for completion and return after PO issuance, with faster and more comprehensive plans receiving favorable consideration. Quotations must include company name and address, Unique Entity ID and CAGE code, point of contact details, itemized pricing, delivery terms, and a completed response to the organizational conflict of interest warrant and disclosure requirement under CAR 1352.209-74. All offerors must be current in the System for Award Management with active registration, and must certify compliance with Buy American requirements, exemption from service contract labor standards, and prohibition on using covered telecommunications equipment. The solicitation incorporates numerous FAR, CAR, and NOAA Acquisition Manual clauses governing government property, inspection, acceptance, payment submission via NOAA’s electronic invoicing platform, and contractor conduct, including sexual assault and harassment prevention policies. Proposals are due by July 31, 2026, at 12:00 PM CT, submitted exclusively by email to nws.nrc.contract@noaa.gov with the solicitation number clearly referenced;
Department Of Commerce Noaa

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811210
New
Federal
NIST Cameca IMS1270E7 Service AgreementThe National Institute of Standards and Technology (NIST) plans to award a sole-source contract to Cameca Instruments, Inc. of Fitchburg, Wisconsin, for the maintenance and repair of its NIST-owned Cameca IMS1270E7 large geometry secondary ion mass spectrometer. This decision is based on the statutory authority under 41 U.S.C. 1901 and the unique requirements of the instrument, which can only be serviced by the original equipment manufacturer due to proprietary software, specialized diagnostic tools, technical documentation, and factory-trained personnel. Cameca is the exclusive provider of authorized service in North America and does not permit third-party resellers to perform repairs or supply spare parts, making their involvement essential for maintaining the reliability and accuracy of the instrument used in critical research areas such as isotopic measurements, materials characterization, and nuclear forensics. The contract will be structured as a firm-fixed-price agreement under NAICS code 811210, with a size standard of 34 million dollars, and will be performed at NIST’s facility in Gaithersburg, Maryland. No competitive solicitation will be issued, as only Cameca has the technical capability to meet the operational needs of the instrument. However, NIST is inviting other responsible sources to submit capability statements by August 10, 2026, demonstrating their ability to provide OEM-equivalent service should any alternative emerge. Failure to secure Cameca’s support risks extended instrument downtime, loss of measurement integrity, and disruption to NIST’s research activities and partner obligations. The point of contact for this action is Hing Pan Wong at NIST.
National Institute Of Standards And Technology

POSTED

about 10 hours ago

DEADLINE

in 17 days
View Details
NAICS: 811210
New
Federal
J065--442 GE Imaging Equipment PM and CM Contract (VA-27-00001327)The Department of Veterans Affairs, Network Contracting Office 19, intends to award a sole source contract to GE Precision Healthcare, LLC for preventative maintenance and service repair of a range of government-owned imaging equipment at the Cheyenne VA Medical Center and the Northern Colorado VA Outpatient Clinic. The services cover GE XR Precision 500D, GE XR Definium 656 HD, GE XR Flashpad HD detectors, Konica Aero DR controllers and detectors, GE NM Discovery 630, GE CT Revolution Frontier, and Xelaris DR workstations, with a one-year period of performance from October 15, 2026, to October 14, 2027. The requirement is sole sourced because the equipment uses proprietary technology, and only the original equipment manufacturer can perform maintenance without risking damage or incurring additional liability for the government. All service orders must be issued under the existing VA IDIQ contract VA797H-17-D-0024, which remains valid through October 14, 2027. The North American Industry Classification System code is 811210, and the business size standard is $34.0 million. This notice is not a request for competitive bids; however, interested parties may submit capability documentation by 12:00 PM Mountain Time on July 31, 2026, to joellen.vest@va.gov to demonstrate their ability to meet the government’s needs, though submission does not guarantee a competitive award.
Network Contract Office 19 (36C259)

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811210
New
Federal
DNCSB group – Bonifacino group equipment maintenance (5 instruments- INFORS shkaers, Calorimeter and AKTA purifier)The National Institutes of Health, through the National Institute of Child Health and Human Development, seeks a small business contractor to provide comprehensive maintenance services for five specialized laboratory instruments used by the Bonifacino research group in Building 35 at the NIH Clinical Center in Bethesda, Maryland. These instruments, which include INFORS shakers, a calorimeter, and an AKTA purifier, support critical biomedical research in protein analysis, cell biology, and biochemical processes. The contractor is responsible for conducting annual preventive maintenance in alignment with manufacturer guidelines, delivering immediate on-demand repairs, supplying all necessary parts and consumables, performing software updates, and providing prompt technical support to ensure uninterrupted research operations. All work must maintain the equipment in safe, reliable, and fully operational condition throughout the contract period. The contract period runs from August 1, 2026, through July 31, 2027, with performance limited to the specified location in Bethesda, Maryland. Deliverables include completed maintenance tasks, detailed service reports documenting all repairs and technical actions, records of replaced components and software modifications, and timely restoration of equipment functionality following service requests. No formal training is required under this contract. The solicitation, designated as 75N98026Q00872, is a total small business set-aside under NAICS code 811210, with responses due by August 3, 2026. The primary point of contact is John Burton, reachable via email at burtonjo@mail.nih.gov.
National Institutes Of Health Olao

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details
NAICS: 811210
New
Federal
Black and White MaintenanceThis solicitation, issued as Request for Quotation SP7000-26-Q-1020 under the Revolutionary FAR Overhaul, seeks a single award firm-fixed-price contract for the maintenance and repair of black and white equipment through the Defense Logistics Agency. The acquisition is unrestricted and falls under NAICS code 811210, with performance expected across approximately five DLA facilities in the Continental United States and Hawaii, including a primary location in DWG, Texas. The contract will have a base period of one year from October 1, 2026, to September 30, 2027, with two optional one-year extensions through September 30, 2029, for a potential total performance period of 36 months and an estimated value of $1,526,580. All pricing must be submitted as per-unit CLIN rates inclusive of all costs, including the equipment, smartcard readers, packaging, shipping, and a full one-year warranty, with no additional priced lines permitted. Submission is exclusively via email to Ernest.Gardner@dla.mil and must be received by 1:00 PM Eastern time on July 17, 2026, with failure to include mandatory elements such as company information, DUNS and CAGE codes, CLIN pricing, and technical documentation resulting in disqualification. The source selection process follows the Lowest Price Technically Acceptable (LPTA) methodology, where technical acceptability is evaluated on a pass/fail basis using descriptive product literature and technical data that demonstrate compliance with minimum requirements, particularly network compatibility (IPv4, IPv6, IPv4/6 hybrid), port and protocol control, and strict prohibition of USB flash drives at DoD installations. Past performance is also evaluated as a pass/fail criterion using the Supplier Performance Risk System but is not weighted against price. Contractors must comply with a broad set of regulatory requirements including DFARS 252.204-7012 for safeguarding covered defense information, FAR 52.204-7 and 52.204-13 for System for Award Management registration and maintenance, and NIST SP 800-161 Rev. 1 for cybersecurity supply chain risk management, requiring documentation to mitigate threats from foreign actors. Equipment must also comply with prohibitions on hexavalent chromium, Buy American requirements, and restrictions on covered telecommunications equipment. Invo
Dcso-P New Cumberland

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811210
New
SLED
Service Plan for Thermo Fisher Gas Chromatography Mass Spectrometer IFBThe Texas Alcoholic Beverage Commission is soliciting service plans for the maintenance and support of its existing Thermo Fisher Scientific Trace 1310 Gas Chromatograph and ISQ LT Mass Spectrometer, devices critical to its analytical operations. The solicitation, numbered 458-E260613, is open to all qualified vendors, with the acknowledging possibility that some required components or services may be proprietary to a single provider under Texas Government Code Section 2155.067, though the agency actively encourages broad participation. Responses must be submitted by August 14, 2026, and all proposals should detail the scope of service, response times, technical capabilities, and any required spare parts or calibration procedures specific to the referenced instrumentation. The point of contact for inquiries is Casey Heideman, reachable via email or phone, with the performance location set within the state of Texas. No set-aside designation has been assigned, making this opportunity open to all eligible suppliers regardless of business size or classification.
Texas Alcoholic Beverage Commission

POSTED

about 24 hours ago

DEADLINE

in 21 days
View Details
NAICS: 811210
New
SLED
DOJ - Bureau of Forensic Services (BFS) Single & Multi-Channel Pipette Service, Repair, Calibration and CertificationThe State of California Department of Justice, Bureau of Forensic Services, is seeking qualified vendors to provide comprehensive service, repair, calibration, and certification for single and multi-channel pipettes used in forensic operations. The solicitation, numbered 0000039860, was posted on July 23, 2026, with a response deadline of August 5, 2026, at 11:00 PM Pacific Time. Vendors must be prepared to deliver services that meet strict quality and accuracy standards required for forensic analysis, ensuring all equipment remains compliant with laboratory and regulatory benchmarks. Work is expected to be performed throughout the state of California, with no specific location designated for performance. The point of contact for this procurement is Terry Barber, reachable via email at terry.barber@doj.ca.gov, and all bids must be submitted through the CalE-Procure portal at the provided UI link. While no set-aside designation or NAICS code is specified, the solicitation is open to all eligible contractors meeting the technical and operational requirements. Contractors should ensure their proposals clearly outline service methodologies, turnaround times, certification protocols, and any relevant experience working with government or forensic laboratories. Compliance with California state procurement regulations is mandatory, and failure to meet deadlines or submission requirements will result in disqualification.
California Department of Justice

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 333998
New
Federal
16--TUBE, DRAINThis contract solicitation, numbered N0038326QQB01, seeks procurement of a 16-inch drain tube under the North American Industry Classification System code 333998, with a small business size standard of 1,250 employees. The solicitation was posted on July 24, 2026, and responses are due by August 24, 2026, following a 30-day extension. Performance is to be conducted by the Naval Supply Systems Command Weapon Systems Support in Philadelphia, Pennsylvania, with primary point of contact provided via email and phone. Mandatory compliance with several federal clauses applies, including the Warranty of Supplies of a Noncomplex Nature, which requires a one-year warranty post-delivery and allows 45 days after defect discovery for remedies. The Buy American Act, Free Trade Agreements, and Balance of Payments Program certifications are required, along with strict limitations on pass-through charges and security prohibitions. Contracting officers must use Workflow Pro's Assist Module, and payment must follow Wide Area Workflow instructions via combined invoice and receiving reports. The contract enforces Equal Opportunity for Workers with Disabilities, mandatory use of AbilityOne support contractors, and compliance with priority rating DO-A1A for national defense purposes. All parties must submit Annual Representations and Certifications under deviation guidelines, and royalty obligations are retained as stipulated. The contract prohibits unauthorized disclosure of offeror information and adheres to all applicable defense procurement regulations.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333415
New
Federal
41--FLEXIBLE DUCTThe solicitation is for 100 units of flexible duct with NIIN 016645640 and part number CS9018-01-360-2, issued by the Navsup Weapon Systems Support under the Department of Defense. Responses must be submitted via email to christopher.campellone.civ@us.navy.mil by the deadline of August 24, 2026, at 8:30 PM Eastern Time, and early or incremental deliveries are preferred. Only approved sources may be awarded; non-approved vendors must submit full documentation as outlined in the NAVSUP WSS Source Approval Brochure available online, or their proposals will be rejected. Government source approval is mandatory prior to award, and failure to meet this requirement may result in the requirement being delayed or reassigned based on fleet support needs. The contract is classified under NAICS code 333415 and includes mandatory compliance with federal regulations, including Buy American provisions, security prohibitions, equal opportunity for workers with disabilities, warranty coverage of 12 months with a 60-day defect discovery window, and the mandatory use of Workflow Pro’s Assist Module. Payment instructions and invoice processing follow the Wide Area Workflow system, and royalty obligations, national defense priority ratings, and annual certifications are all applicable. The place of performance and delivery details are unspecified, but the contracting office is located in Philadelphia, Pennsylvania.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
Federal
59--CONNECTOR,RECEPTACLThe U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia plans to award a sole-source contract to The Boeing Company for two units of a connector, receptacle part identified by NSN 0Q-5935-017222756-SX and part number D0090557-201, with delivery term FOB origin. This part is exclusively manufactured by the original equipment manufacturer, and the government holds no data or intellectual property rights that would allow procurement from alternative sources, making The Boeing Company the only viable supplier under 10 U.S.C. 2304(c)(1) and FAR 6.302. The acquisition is categorized under NAICS 335931 and PSC 500, with a contract duration of one year, subject to UID requirements and Buy American provisions. The procurement will follow FAR Part 15 procedures and will not utilize commercial item acquisition policies under FAR Part 12. All interested parties may submit capability statements within 45 days of the notice, but no competition is anticipated, and the government will not delay the process to consider new source approvals. The request for proposal is scheduled for release on July 24, 2026, with proposals due by August 24, 2026, and an anticipated award on September 24, 2026. The solicitation will be posted electronically via NECO, with no hard copies or phone inquiries accepted. All submissions must be directed via email to Deja Thompson-Mitchell.
Current-Carrying Wiring Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
99--FAIRING INBOARD,LOWThe U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, intends to award a sole-source contract to The Boeing Company for 28 units of the Lower Fairing Drive part, identified by NSN 1R-0000-LLF02N981-GF and part number 74A192793-1004, exclusively for use on G-F aircraft. This part is critical for aircraft maintenance and has no interchangeable alternatives, as The Boeing Company is the original equipment manufacturer and the sole known source with the proprietary data and rights necessary for production. The government does not possess the technical data rights required to source this part from any other vendor, and this procurement is justified under 10 U.S.C. 2304(c)(1) and FAR 6.302, allowing noncompetitive acquisition due to the absence of viable alternatives. The contract will last one year, with delivery occurring FOB origin, and will include UID marking and Buy American requirements. The solicitation will be conducted electronically via NECO under FAR Part 15 procedures, with no use of commercial item acquisition policies. The RFP is anticipated to be issued on July 24, 2026, with proposals due by August 24, 2026, and an award expected by September 24, 2026. While the notice is not a request for competitive bids, any firm capable of supplying the item as a commercial item may respond within 15 days of the notice, and all submissions received within 45 days of publication will be reviewed for potential competitive alternatives. No small business set-aside is planned, and all sources must comply with source approval requirements; new manufacturers must submit a Source Approval Request, though the procurement will proceed without waiting for approval. Interested parties must submit capability statements via email to the designated point of contact, and no phone calls or hard copies will be accepted.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
Federal
53--CLAMP,LOOPThis contract, issued under solicitation number N0038326QQA80 by the Navy’s Naval Supply Systems Command Weapon Systems Support, seeks a contractor to supply 53–CLAMP, LOOP, with strict requirements tied to military specifications and quality assurance standards. The work falls under NAICS code 332510 and is subject to a small business size standard of 750 employees. The contractor must comply with MIL-STD-130 for item marking and maintain a quality control system compliant with Mil-I-45208A, Mil-Q-9858, or ISO 9000/9001/9002 equivalents. All inspections, repairs, and testing procedures must be documented, approved by the Government, and supported by sequential diagrams and performance specifications. The contractor is responsible for inspecting all purchased materials against the Technical Data Package, maintaining detailed records for at least 12 months, and implementing controls for nonconforming material, including segregation and disposition protocols. The Internal Review Board has limited authority for minor rework but cannot approve “AS-IS” dispositions, which remain under Government control via the Material Review Board. Repair assessment testing by Government personnel may occur quarterly on randomly selected items, and complete historical records—including inspection data, repair cards, part replacements, and test results—must be maintained by serial number and made available upon request. The contract includes mandatory compliance with several federal and DoD regulations including Buy American provisions, limitations on pass-through charges, security exclusions, and equal opportunity requirements for workers with disabilities. Warranty coverage extends one year after delivery, with defects to be reported within 45 days of discovery. All invoices and receiving reports must be submitted via the Wide Area Workflow system, and use of the Workflow Pro Assist Module is required. The contractor must submit royalty information, adhere to priority ratings for national defense use, and certify compliance with Federal Acquisition Regulation clauses, including annual representations and certifications. The point of contact for inquiries is Deja S. Thompson-Mitchell, reachable via email, with proposals due by August 24, 2026. Packaging must conform to MIL-STD-2073, and all work is to be performed in accordance with the Statement of Work, regardless of whether specific inspection clauses are explicitly listed. Failure to meet any requirement may result in rejection of deliverables, even under sampling protocols, as the Government reserves the right to reject known defective items.
Hardware Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339991
New
Federal
49--FILLER AND BLEEDER,The contract solicitation NSN 1R-4920-012695376-SX seeks three units of a filler and bleeder component under solicitation number N0038326QPC09, with delivery terms set at FOB origin. The requirement is managed by the Navy Supply Systems Command Weapon Systems Support, based in Philadelphia, Pennsylvania, and is posted as a presolicitation with responses due by September 8, 2026. Offerors must ensure that the product, manufacturer, or themselves meet all qualification requirements at the time of award, as governed by FAR clause 52.209-1, and must verify compliance through approved military and federal specifications available via ASSIST-Online or the DoD Single Stock Point. The Government is not applying commercial item acquisition policies under FAR Part 12, but interested parties may still propose commercial alternatives within 15 days of this notice if capable of meeting technical requirements. All documentation referencing patterns, drawings, or deviations is not available at DODSSP and must be obtained through alternate channels. For inquiries, potential bidders may contact the primary point of contact, Shamus F. Roache, via email or phone as listed.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 2 months
View Details
New
Federal
99--DUCT,EXTRACTOR OUTLThe government is seeking to procure two units of a flight-critical extractor duct under NSN 1R-9999-LLJMPZ995-QE and REF NR 821312-2, with delivery terms FOB origin, due to the absence of sufficient, accurate, or legible technical data that would permit acquisition through full and open competition. Only sources previously approved by the Government for this item have been solicited, as the technical nature of the part and its critical role in flight systems necessitate source approval prior to contract award. The time required to evaluate and approve a new source would delay delivery beyond mission-critical timelines, so the procurement will proceed under the authority of FAR 6.302-1, allowing sole-source negotiation. All prospective offerors, regardless of prior approval status, must submit complete source approval documentation as detailed in the NAVSUP Weapon Systems Support brochures, either demonstrating existing experience with similar items or providing full technical data for new manufacturers. Offers lacking required documentation or proof of a pending approval request will be deemed nonresponsive. Approval evaluations underway must be substantiated with a copy of the cover letter forwarded to NAVSUP WSS. The solicitation number is N0038326QNA54, with a response deadline of July 30, 2026, and is published as a presolicitation notice allowing all responsible sources to express interest or submit proposals within 45 days, or 30 days if awarded under an existing Basic Ordering Agreement. While this notice is not a request for competitive bids, submissions received within the timeframe will be evaluated to determine whether competition is feasible; however, the Government retains full discretion to proceed without competition based on fleet support needs and technical constraints. Technical documents such as military specifications, qualified product lists, and standards can be obtained via ASSIST-Online or the DoD Single Stock Point, though drawings, patterns, and deviation lists are not available there. The primary point of contact for inquiries is Arianna G. Pilla of the Department of Defense, Navy Supply Systems Command, and all communications must reference the official SAM.gov listing for this requirement.

POSTED

about 10 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
Federal
70--MEMORY UNIT,AIRCRAF, IN REPAIR/MODIFICATION OFThe contract solicitation NSN 7R-7010-015350456-QE seeks 58 memory units for aircraft in repair or modification, with delivery terms set at FOB origin. The item is associated with TDP version 002 and falls under a presolicitation by the Naval Supply Systems Command Weapon Systems Support, a division of the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by September 8, 2026. The office is located in Philadelphia, Pennsylvania, and the point of contact is Ethan T. Stein, reachable via email at ETHAN.T.STEIN.CIV@US.NAVY.MIL or by phone at (215) 697-2983. No set-aside classification or NAICS code is specified, and the place of performance details are not provided, indicating that delivery responsibility rests with the vendor at the point of origin.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336413
New
Federal
16--REEL,SHOULDER HARNEThis solicitation, identified as N0038326QFA99, is a total small business set-aside for the procurement of a reel shoulder harness under NAICS code 336413, issued by the Naval Supply Systems Command Weapon Systems Support in Philadelphia, Pennsylvania. The requirement is subject to mandatory source approval, meaning all offerors must submit complete documentation as outlined in the NAVSUP WSS Source Approval Brochure to be eligible for award; failure to do so will disqualify the proposal. The Government has determined that no other source can currently meet its needs due to insufficient or inadmissible data, and award may proceed based on fleet support requirements if source approval cannot be finalized in time. The solicitation mandates compliance with numerous federal regulations including Buy American provisions, limitations on pass-through charges, security exclusions, and the mandatory use of Workflow Pro’s Assist Module, alongside specific payment and identification instructions. The contract is awarded based on best value, evaluating price, capacity/delivery capability, and past performance. Offers must be submitted electronically via email to kate.n.schalck.civ@us.navy.mil no later than August 24, 2026, at 8:30 p.m. Eastern Time. The Government accepts proposals via email as binding agreements upon acceptance, and all awardees must comply with the requirements for item unique identification, valuation, and royalty information as specified. The point of contact for inquiries is Kate N. Schalck, with a direct phone number provided, and all correspondence must reference the solicitation number and adhere strictly to the detailed compliance obligations outlined.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334513
New
Federal
66--TRANSMITTER,PRESSURThe contract pertains to the procurement of a transmitter, pressur, under solicitation number N0038326QSB19, issued by the Naval Supply Systems Command Weapon Systems Support and falls under NAICS code 334513 for communications equipment manufacturing. The solicitation was posted on July 24, 2026, with a response deadline of August 24, 2026, and requires offers to comply with mandatory government regulations including Buy American provisions, security prohibitions, and warranty terms for noncomplex supplies, which include a 12-month warranty with a 60-day window for defect discovery. All proposals must adhere to the mandatory use of Workflow Pro with the ASSIST module and include complete source approval documentation as defined in the NAVSUP WSS brochure, as the items require prior government source authorization—failure to provide all required data will result in disqualification. Payment instructions mandate the use of the Invoice and Receiving Report Combo Type through Wide Area Workflow, and transportation of supplies must comply with sea transport specifications. The contract also incorporates requirements for equal opportunity for veterans and workers with disabilities, value engineering considerations, and integrity of unit pricing, with no set-aside type specified. A notice of priority rating for national defense and emergency preparedness applies, emphasizing urgency. Point of contact information is listed as Charles F. Horan, reachable via email or telephone, and the place of performance and office address are in Philadelphia, Pennsylvania. Additional clauses cover royalty obligations, transportation by sea, and annual representations and certifications under a recent deviation, all of which must be satisfied. Offers must fully meet the source approval criteria, as incomplete submissions will not be considered for award, and the government may proceed based on fleet support needs if timely approval cannot be secured.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--VALVE,ECS, IN REPAIR/MODIFICATION OFThis solicitation is a sole-source procurement by the Navy’s NAVSUP Weapon Systems Support for the repair and modification of an ECS Valve, identified by part number 7RH 1660 016686579 P8 and drawing number 79318-423775-1. The work must be performed at Meggitt’s facility in North Hollywood, CA, and all repairs must conform to the latest approved revisions of technical manuals, drawings, and specifications. Items must be restored to a Ready for Issue (RFI) condition through overhaul or repair processes that include disassembly, inspection, component replacement, reassembly, and rigorous testing. The contractor is solely responsible for providing all tools, fixtures, test equipment, and materials unless explicitly designated as Government Furnished Property. All repairs require strict adherence to configuration control, prohibiting unauthorized changes to processes, sources, or facilities without prior written approval from the Procuring Contracting Officer. Any deviations, including beyond economical repair (BER), missing on induction (MOI), or over and above (OAR) repairs, require formal documentation and DCMA concurrence before proceeding. The contractor must maintain a certified quality management system compliant with ISO 9001/SAE AS9100 and a calibration program meeting ANSI/NCSL Z540.3 or equivalent standards. All purchased parts must be new, as defined by FAR 52.211-5, and subject to receiving inspection with detailed documentation of dimensional, material, and process data. Cannibalization of parts is strictly prohibited unless explicitly authorized by NAVSUP WSS and the BDE. Items must be marked per MIL-STD-130, stored in controlled environments, and packaged according to MIL-STD-2073. The Government retains full authority over the final disposition of rejected, BER, or OAR items, and the contractor assumes all risk and cost for any work performed using unapproved methods or sources. The contract mandates a one-year warranty from the delivery date, with defects must be reported within 45 days of discovery. Proposals must be submitted by August 6, 2026, and remain valid for 120 days, with all communication routed through Danielle Junod at the designated Navy email address.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
Federal
29--HEAD,FLUID FILTERThe U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, is pursuing a sole source acquisition for one unit of a fluid filter head identified by NSN 1R-2945-016665604-H5 and part number 06353-08801-106, with delivery to occur FOB origin. The requirement is intended for award to Sikorsky Aircraft Corp under an existing Blanket Purchase Agreement N00383-26-G-P401, as the Government lacks sufficient, accurate, or legible technical data to allow for competitive sourcing. The item is subject to Free Trade Agreements and the World Trade Organization Government Procurement Agreement, necessitating prior Government Source Approval, which cannot be obtained within the required timeline to permit competitive bidding. Interested parties not already approved sources must submit full documentation as outlined in the NAVSUP WSS Source Approval Brochure; proposals missing this required information will be disqualified. The solicitation, issued under number N0038326QFB01, has a response deadline of September 8, 2026, and is publicly posted as a presolicitation with no set-aside designation. The sole point of contact for questions is Taylor M. O'Connor, reachable via email or phone at the provided Naval facility in Philadelphia.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 2 months
View Details