Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

November 2026 Small Business Contracting Rules: Proposed Size Standards and a 10% Veteran Goal

The small business contracting rules moved on four fronts this fall: an SBA size standards overhaul whose comment period closed November 20, a 10% veteran contracting goal, a planned rewrite of the limitations on subcontracting, and audits of 689 former 8(a) firms. Here is what changed, what is still proposed, and what small businesses and primes should do before year-end.

Mithat Cakmak

23 min read

Share
November 2026 Small Business Contracting Rules: Proposed Size Standards and a 10% Veteran Goal

Small business contracting rules rarely move on four fronts at once. This fall they did. On November 20, 2026, the comment period closed on the Small Business Administration's proposal to rewrite every small business size standard. SBA estimates that 37,002 firms that held about $71 billion in federal contracts in FY2025 would become small. Eleven days earlier, SBA doubled the FY2027 contracting goal for veteran-owned firms to 10%. An inspector general report found persistent gaps in how agencies check the limitations on subcontracting across more than $107 billion a year in set-aside awards, and SBA has promised a rewrite by April 1, 2027. Meanwhile, 689 firms removed from the 8(a) program are under contract audit at GSA. This review covers what changed, what is still only proposed, and what small businesses and the primes that team with them should do before the year ends.

TL;DR

  • Size standards are being rewritten, not yet replaced. SBA's August 20 proposal cuts roughly 1,000 NAICS-level standards to 338, moves most industries to employee counts, sets a floor of 500 employees or $30.6 million, removes the ceiling, and lowers nothing. Comments closed November 20. The current table still applies until a final rule takes effect.
  • The proposed caps are much higher. IT services would go from $34 million to $531 million and engineering services from $25.5 million to $252 million. SBA says 37,002 current federal contractors become small. Its own Office of Advocacy puts the number at 4,000 to 6,000.
  • The veteran goal doubled on paper. SBA set a 10% FY2027 prime and subcontracting goal for a combined veteran-owned and SDVOSB category. The statute still sets 5% for SDVOSBs, and agencies outside VA have no authority to set aside contracts for VOSBs.
  • Compliance is being checked from both ends. SBA OIG Report 26-19 found that agencies verify the limitations on subcontracting inconsistently, and SBA plans a draft rewrite of 13 CFR 125.6, with new thresholds, by April 1, 2027. Separately, 689 removed 8(a) firms are under GSA audit, and the DOT's new DBE rule requires every certified firm to be reevaluated by December 24, 2026.
  • Set-asides are moving to the order level. The FAR overhaul's Part 19 text does not apply the rule of two to orders, SEWP VI has no socioeconomic set-aside groups, and CIO-SP3 Small Business closed to new orders on October 29. Getting on the vehicle is now the first gate.
  • The new Congress changes who asks the questions. Democrats take both chambers on January 3, 2027. Bills to codify the rule of two and protect current 8(a) participants already have Democratic sponsors, and oversight of SBA's changes is likely.
  • CLEATUS keeps the pipeline moving while the rules shift. CLEATUS matches set-aside opportunities to your capability profile, breaks down every solicitation package the moment it matches, and runs AI Workflows that triage new matches for your team. The current SBA size standard appears beside the NAICS code on every contract page, and contractor profiles show each competitor's and partner's set-asides and award history.

The SBA Size Standards Overhaul: Who Counts as Small Is Changing

SBA published its proposed rule on August 20, 2026 (docket SBA-2026-0199), together with a revised methodology for setting size standards (docket SBA-2026-0265). Comments were first due September 21. SBA extended the period by 60 days, to November 20, 2026 (91 FR 60524). The law firm Schwabe calls it the largest expansion of small business size standards in decades, and the numbers support that description.

Nothing has changed yet. The proposal is not effective and would not apply retroactively. Until SBA publishes a final rule and it takes effect, every offer, certification, and recertification uses the current size table. When the new table does take effect, it applies the next time you represent your size: on a new offer, at a required recertification, or after a merger or acquisition. Contracts you hold today are not reclassified automatically.

What the size standards proposal changes

Far fewer standards. Today SBA publishes 978 six-digit NAICS standards plus 18 subindustry exceptions. The proposal replaces them with 338 standards: 276 for four-digit industry groups and 62 for five-digit industries. All 18 exceptions go away, including the information technology value-added reseller (ITVAR) exception under NAICS 541519. One standard would cover a whole group, so all of NAICS 5415 (computer systems design and related services) would share one cap.

Employees become the default. Receipts-based standards fall from 496 to 129. Employee-based standards rise to 208, and one asset-based standard covers depository institutions. SBA uses employee counts wherever it believes it has the discretion to, though many service industries, including IT services, engineering, and consulting, stay receipts-based. The entire construction sector moves to employee counts.

A floor, and no ceiling. SBA proposes a minimum of 500 employees or $30.6 million in receipts for every industry. It removes today's maximums of $47 million and 1,500 employees. Standards rise with the average market size of the industry, at a decreasing rate.

Nothing goes down. SBA proposes no decrease to any existing size standard. Its new method would support lower standards in 45 industries, but SBA keeps the current ones, citing American manufacturing, national security, and industrial base resilience.

A simpler method. Three factors replace the old seven: the national size of the industry, the number of geographic markets, and an adjustment for net imports. Receipts-based standards also adjust for productivity growth, not only inflation.

Here is what that looks like for codes that federal contractors use most. These figures come from law firm summaries of SBA's proposed table. Check the Federal Register table for your own code before you rely on any number.

NAICSIndustryCurrent standardProposed standard

5415 (incl. 541512)

Computer systems design and IT services$34 million$531 million
541330Engineering services$25.5 million$252 million

5416 (incl. 541611)

Management, scientific, and technical consulting$19 million to $29 million$295 million
561210Facilities support services$47 million$156 million
518210Computing infrastructure, data processing, and hosting$40 million$402 million
236220Commercial and institutional building construction$45 million600 employees
237310Highway, street, and bridge construction$45 million700 employees
541715R&D in the physical, engineering, and life sciences1,000 employees2,800 employees

5132 (incl. 513210)

Software publishers$47 million3,600 employees

How many firms become small depends on who is counting

SBA estimates that about 114,541 more firms would count as small, a 1.8% increase over the 6.3 million employer firms in the country, and that fewer than 200 would lose small status. The number that matters for federal work is narrower: SBA says 37,002 firms that held more than 105,000 federal contracts worth about $71 billion in FY2025 would become small. As Schwabe notes, SBA's analysis identifies more than 5,300 newly small firms with existing contracts in engineering services alone.

SBA's own Office of Advocacy reached a very different figure. Its September analysis put the number of current federal contractors that would gain small status at 4,000 to 6,000. The gap is not a rounding error. One estimate describes a modest adjustment at the margin. The other describes tens of thousands of established incumbents entering the set-aside competitions where today's small firms bid.

SBA already had to give commenters more time. Its September 24 extension notice cites requests for more time to comment and SBA's own clarification of the rule's impacts. Crowell reported that many early comments were negative and asked SBA to re-propose the rule.

Who gains ground and who loses it

Firms near today's cap gain runway. A firm that is about to outgrow a $34 million standard would have room to grow to many times its size and stay small. For employee-based codes, revenue growth from contract performance would no longer push a firm out of small status, which eases what CSIS calls the growth penalty.

Entity-owned firms gain the most. Firms owned by Alaska Native Corporations, tribes, Native Hawaiian Organizations, and Community Development Corporations do not face the personal economic disadvantage caps that limit individually owned 8(a) participants. Schwabe argues that these firms are the ones that can use the full scale the new standards allow.

The smallest and newest firms carry the risk. The Congressional Research Service notes concern about "the crowding-out of the smallest or newest contractors by larger firms." Wiley points out that in some industries, multibillion-dollar public companies could qualify as small. A 40-person IT services firm that competes in 541512 set-asides today could find itself bidding against incumbents with hundreds of millions in revenue.

Labor-intensive firms do not automatically win. A conversion to employee counts helps a firm with high revenue per employee. It can hurt a firm that performs labor-heavy work with a large headcount. Check how your code converts before you assume the change helps you.

Set-aside pressure may fall. Agencies earn small business goal credit for awards to small firms, including awards made in full and open competition. If many incumbents become small, agencies can meet their goals without setting work aside, and some of the pressure that drives set-asides goes away.

What happens next with SBA size standards

SBA has not said when it will publish a final rule. It plans to finalize the methodology and the table together. Final rules typically take effect about 30 days after publication, but no date is set. Comments filed by November 20 are part of the record, and the final table could differ from the proposal.

For primes, the effect cuts both ways. Teaming partners that outgrew their codes could become small again, which widens the pool of partners that count toward your subcontracting plan. Competitors that you meet today in full and open competition could start bidding set-asides, and some of your current small partners could face larger competitors on their own primes.

The Veteran Contracting Goal Doubled to 10%

On November 9, the first day of National Veterans Small Business Week, SBA announced its FY2027 contracting goals in News Release 26-116. The headline change is a new combined category, "Veteran-Owned and Service-Disabled Veteran-Owned Small Businesses," with a goal of 10% of prime contract dollars and 10% of subcontract dollars. The SDVOSB goal had been 5%.

CategoryFY2027 prime goalFY2027 subcontracting goal
Veteran-owned and service-disabled veteran-owned10%10%
Small disadvantaged business5%5%
Women-owned small business5%5%
HUBZone3%3%

SBA framed the change as building on a strong year. SDVOSBs received $32.5 billion in federal prime contracts in FY2025, which SmallGovCon puts at 5.01% against the 5% goal. SBA also says it approved more than 18,000 contracting certifications for veteran-owned small businesses in FY2026.

What the 10% veteran goal does not change

The statute still says 5%. The Small Business Act sets a governmentwide goal of at least 5% for SDVOSBs and sets no goal for VOSBs at all. Crowell notes that the Act gives goal-setting authority to the President, and asks whether a combined category fits the statute. The statutory 5% stays in place unless Congress amends the Act.

There is no new set-aside authority. Under 13 CFR 128.400(a), VOSB contracts are exclusively Department of Veterans Affairs procurements. Womble Bond Dickinson concludes that agencies outside VA "currently lack authority to establish VOSB set-asides to meet the new combined goal." Outside VA, SDVOSB set-asides are still at the contracting officer's discretion under FAR 19.1405.

Goals are targets, not mandates. Missing a goal carries no penalty, and SBA has not said how it will measure the combined category. Expect agencies to lean harder on SDVOSB set-asides and on prime subcontracting plans, because those are the tools they have.

The subcontracting clause is the same. The new 10% subcontracting goal does not amend the subcontracting plan requirements in FAR 52.219-9. Contracting officers negotiate plan goals with each prime, though, and some will ask for more veteran participation in FY2027 plans.

Congress has its own version. The Contract Our Veterans Act of 2026 (S. 3964, introduced March 3 by Sen. Tim Sheehy, and H.R. 7534, introduced February 12 by Rep. Randy Fine) would set a 5% governmentwide VOSB goal and create new authority for restricted competitions and sole-source awards to veteran-owned firms. Both bills are in committee.

If you are veteran-owned, the practical steps have not changed: keep your VetCert certification and SAM representations current, watch agency forecasts and sources-sought notices, and confirm the ownership and control of any joint venture before you bid. An inaccurate representation carries False Claims Act and suspension and debarment exposure.

Limitations on Subcontracting: SBA Plans a Rewrite

The limitations on subcontracting (LOS) cap how much of a set-aside contract a small business can pass to firms that are not similarly situated. Under 13 CFR 125.6, the caps are 50% of the amount paid for services and for supplies, 85% for general construction, and 75% for specialty trade construction, with the cost of materials excluded for supplies and construction. A small business that exceeds the cap faces a fine of $500,000 or the amount by which it exceeded the limit, whichever is greater. It can also face termination for default, suspension or debarment, False Claims Act liability, and removal from SBA programs.

The inspector general says the system around those caps does not work. SBA OIG Report 26-19, consolidated on September 30, 2026, pulls together eight inspector general reports from SBA, GSA, the Department of Energy, the Department of the Interior, and the Department of War. Agencies award more than $107 billion a year in set-aside contracts, on a five-year average. The OIG found that agencies verify compliance inconsistently and that nobody clearly owns the job. Contracting officers often misunderstand the performance percentage and which costs are excluded. Agencies do not adequately check before award whether an offeror can comply. The compliance tools that do exist are "often incomplete, inaccurate, or not submitted."

SBA agreed and set a date. SBA largely agreed with the recommendations and plans a draft revision of 13 CFR 125.6 by April 1, 2027. The revision would set new subcontracting thresholds, clarify oversight and tracking, and remove unclear language. Nothing has been published yet, so the current caps apply.

Do not wait for the rewrite to check your numbers. The draft is a signal that agencies will look harder at LOS compliance, not only when a protest forces the question. Track the calculation during performance, not at closeout. Keep contemporaneous records of what you pay each subcontractor and which costs you exclude. If you are a large business teaming as a subcontractor to a small prime, the limit applies to the dollars your prime pays you, not to your share of the tasks. Different labor rates, fees, and excluded material costs can make a split that looks compliant on paper exceed the limit in dollars. Set a payment ceiling in the teaming agreement and track invoiced and paid amounts against it together.

Small Business Status Is Under Audit

8(a) referrals reach beyond the removed firms

On October 21, SBA referred 689 firms it had removed from the 8(a) program to GSA for a review of the contracts they won while in the program. GSA is looking for improper awards, false statements, and pass-through arrangements, and it will refer evidence of fraud to the Department of Justice. According to SBA figures cited by Wiley, the affected firms held contracts with a combined ceiling of about $5.5 billion. The Department of War and the Treasury Department are running their own 8(a) audits.

The questions will not stop at those 689 firms. Wiley warns that primes, subcontractors, joint venture partners, and other entities connected to the questioned awards may receive requests for eligibility information and certifications. If you teamed with an 8(a) firm in the last few years, gather the teaming agreement, the subcontractor payment records, and the LOS calculations now, before anyone asks. Our 8(a) program changes guide covers the September 10 admission rules, and our analysis of SBA's data-driven enforcement covers how the earlier suspensions worked.

DOT's DBE rule restarts certification for state and local work

The Department of Transportation finalized changes to its Disadvantaged Business Enterprise (DBE) and Airport Concessions DBE programs on September 25, 2026. The rule removes the race- and sex-based presumptions of disadvantage. Owners must now show individual disadvantage by a preponderance of the evidence under revised 49 CFR 26.67.

The deadline is December 24, 2026. Unified Certification Programs must generally finish reevaluating certified firms by that date, with one extension of up to 90 days for good cause. Until a program finishes and notifies DOT, recipients in that jurisdiction cannot set DBE contract goals or count DBE participation. That affects the state DOTs, transit agencies, and airports that run DBE programs with federal transportation money, which makes it a SLED issue as much as a federal one. The BUILD America 250 Act (H.R. 8870), pending in the House, would keep a 10% national DBE goal through FY2031 and require DOT to publish objective disadvantage criteria.

Set-Asides Are Moving to the Order Level

The biggest structural shift in small business contracting is not in any one rule. It is in where set-asides happen.

The rule of two stops at the order. Under the Part 19 text that the FAR Council released on September 26, 2025, as part of the Revolutionary FAR Overhaul, the rule of two survives for contracts at proposed FAR 19.104-1. A contracting officer must set aside a contract when two or more responsible small businesses can meet the requirement at a fair price. The rule does not apply to task orders under multiple-award contracts. For orders, contracting officers may set work aside but are not required to. The FAR Council has not yet published Part 19 as a proposed rule.

The big vehicles now set aside each order. SEWP VI, which launched on November 1, has no socioeconomic set-aside groups. The contracting officer sets any set-aside, and the NAICS code, on each order. Category C, mission services, is small business only and has 1,059 awardees. SEWP V keeps taking new orders through January 31, 2027. Our SEWP VI guide covers how the quote requests work.

Some small business vehicles are gone. NIH's CIO-SP3 Small Business closed to new orders on October 29, 2026, along with CIO-SP3 and CIO-CS. Orders placed on or after June 8 must finish by December 31, 2028. That work moves to other vehicles when it recompetes.

The result is a two-gate market. First you need a seat on the vehicle. Then the order has to be set aside for a category you hold. A firm with the right certification but no seat sees none of that work, and a firm with a seat sees only the orders a contracting officer chooses to restrict. Our contract vehicles guide covers how to research which vehicles your agencies actually use.

The thresholds are still proposals. The simplified acquisition threshold has been $350,000 since October 1, 2025. OMB's 2025 legislative package would limit the statutory rule of two to buys below $250,000 even if that threshold rises. Its July 2026 package would raise the threshold for commercial services to $10 million by 2030, and says those buys "would not be subject to statutory small business set-asides." Congress has not enacted either, and the FY2027 NDAA, one of the likeliest vehicles, has not passed.

Fixed-price shifts risk to the firms least able to absorb it. Executive Order 14402 made firm-fixed-price the default. Since July 15, a contracting officer who wants any other contract type needs an approved justification before the solicitation goes out. The proposed FAR Part 16 rule would also require agency-head approval above $10 million at most agencies and $100 million at the Department of War. A five-person firm that cannot see its real cost per task order carries the overrun itself. Our July 2026 review covers the fixed-price change in detail.

Small Business Contracting Rules After the Midterms

Democrats won both chambers of Congress on November 3. The new Congress is sworn in on January 3, 2027, and divided government returns for the last two years of the administration. Few new procurement laws are likely to pass, but the questions asked of SBA are likely to change.

The sponsors of the counter-proposals are senior Democrats. Rep. Nydia Velázquez, the ranking Democrat on the House Small Business Committee, and Sen. Ed Markey sponsor the Protecting Small Business Competitions Act (H.R. 2804 and S. 2656), which would codify the rule of two for all federal agencies. Velázquez also co-introduced H.R. 10071, the 8(a) Small Business Integrity and Stability Act of 2026, which would grandfather current 8(a) participants under the previous rules. Both bills are only introduced. A Democratic majority makes hearings on them more likely, and passage still runs through the President's veto.

Expect oversight of the 8(a) overhaul and the size standards rule. Senate Small Business Committee Democrats have already pressed Administrator Kelly Loeffler on SBA's 8(a) audit. With committee gavels, they can call witnesses and demand documents. Oversight cannot reverse a final rule on its own, but it can slow one, shape its final text, and build a record that matters if the rule is challenged.

Funding comes first. The current continuing resolution funds the government through December 11, 2026, and none of the 12 regular FY2027 appropriations bills has been enacted. If Congress does not act, a lapse begins December 12. Small firms feel a shutdown first, because they have the least cash to carry unpaid work. Check your funded value against your burn rate on every contract, and confirm your line of credit before the deadline.

What to Do Before Year-End: A Small Business Contracting Rules Checklist

If you hold or pursue set-aside work

  1. Look up every NAICS code you bid under, in both tables. Note the current standard, the proposed standard, and whether your code converts from receipts to employees. Decide whether the change helps you, hurts you, or brings new competitors into your set-asides.
  2. List the incumbents that would become small in your codes. Pull the top award winners in your agencies and codes, and mark the ones that are over today's cap but under the proposed one. Those are your future set-aside competitors.
  3. Refresh your certifications and representations. Confirm your SAM representations, VetCert, HUBZone, WOSB, or 8(a) status and their recertification dates. Fix any mismatch between your SAM profile and what your certifications say.
  4. Run a limitations on subcontracting check on every active set-aside contract. Do it now, with your current payment records, not at closeout.
  5. Prepare for an audit-style request. Keep three years of financial statements and tax returns, your teaming agreements, and your subcontractor payment records ready to produce.
  6. Get on the vehicles where the orders are set aside. If your agencies buy through SEWP VI, GSA's Multiple Award Schedule, or an agency IDIQ, a seat on that vehicle matters more than the certification alone.
  7. Plan cash for December 11. Know which contracts are incrementally funded and how long you can perform without payment.

If you are a prime or a large business

  1. Re-baseline your teaming roster. Mark partners that would become small under the proposed table and partners whose status is at risk. Both change which partners count toward your plan.
  2. Review your FY2027 subcontracting plans. Expect contracting officers to ask about veteran participation against the new 10% goal, even though FAR 52.219-9 has not changed.
  3. Check your exposure to the 8(a) audits. Identify every joint venture, mentor-protégé agreement, and subcontract with a removed 8(a) firm, and gather the records.
  4. Cap what your small prime pays you. The limit counts dollars paid, not tasks or hours. Put a payment ceiling tied to your prime's limit in the teaming agreement, and track the amounts paid during performance.
  5. Check your DBE subcontractors on DOT-funded work. Confirm their reevaluation status before December 24, and plan for goals that recipients cannot set or count until reevaluation finishes.

Why the Rule Text Alone Won't Show You the Market

Reading the Federal Register tells you who counts as small. It does not tell you which incumbents in your codes would become small competitors, which agency is moving its work onto an order-level vehicle, or which recompete will be set aside this time. That information lives in award records, forecasts, and solicitation packages spread across SAM.gov and 50,000+ other government sources, and each package is a set of documents: base solicitation, amendments, attachments, and Q&A.

The rule changes add a second layer of uncertainty. A set-aside can change between the forecast and the solicitation. An order-level set-aside appears only in the order request. A size standard you checked last quarter can change with a final rule. A team that only follows regulatory news will understand the rules and still miss the work.

How CLEATUS Helps as Small Business Contracting Rules Change

Set-aside work finds you. Auto Capture matches federal, state, and local opportunities to your capability profile, past work, and certifications. You can create custom alerts with AI by describing what you want, for example facilities maintenance work in Texas set aside for small business.

Every package arrives already broken down. When an opportunity matches, Contract Breakdown reads every page of the package automatically: base document, amendments, attachments, and exhibits. Contract requirements turns the package into a checklist of every requirement, each with the quote it came from, so the set-aside terms and performance requirements are in front of you before you commit.

The routine checks can run on their own. AI Workflows can start from a custom alert match and carry out the next steps: triage the opportunity, create or update the pursuit, and email the right person from your own mailbox. For a prime's BD operations team, that means the intake and gate work happens on schedule instead of when someone has time.

Size is visible next to every NAICS code. The current SBA size standard appears beside the NAICS code on contract, pursuit, award, and teaming pages, and on every card in the public NAICS directory. You check eligibility on the page where you make the bid decision.

Competitors and partners come with their status. Contractor profiles show each company's set-asides, NAICS focus, and award history, and agency pages rank the contractors that win the most at each agency, so you can see which incumbents you will meet. Subcontractor search lists the companies that have done work at a base or city and separates agency-verified certifications from self-reported claims. Teaming partner import turns your own subaward history into a partner list in CLEATUS CRM, which helps a prime re-baseline its roster.

Recompetes and forecasts carry the set-aside. Incumbent details show who holds the work, with the previous award's value and term. Forecast Recommendations score upcoming opportunities against your capabilities, and forecast pages lead with the estimated award date, estimated value, and anticipated set-aside, so you can plan capture before an RFP appears.

"CLEATUS turned the pursuits I didn't even see into pursuits I can actually win. Discovery used to eat my nights and weekends. Now the fit scoring kills the bad opportunities in 30 seconds instead of 30 minutes."

– Jack Tavares, Chief Visionary Officer, Total Network Consulting

When the rules change, the time you save on triage is the time you spend on the decisions the rules now force. D2 Government Solutions tripled its proposal output with 75% faster discovery. MST Maritime Management went from 3 to more than 10 proposals per month. Operation Hired reached 6× proposal throughput.

Frequently asked questions

Get Started →


Further Reading

Customer Stories


About CLEATUS

CLEATUS is an agentic AI platform that helps government contractors discover the right opportunities, manage capture pipelines, and write winning proposals. Automate your GovCon operations end-to-end: build custom AI-powered automations that handle multi-step processes on autopilot, a force multiplier for your capture and BD team that works in the background while you stay in the loop on every decision. We aggregate federal, state, local, and city opportunities; our GovCon Copilot analyzes solicitations and your internal documents to deliver actionable market intelligence that drives revenue growth.

Cover photo: Harrison Brothers Hardware, South Side Square, Huntsville, Alabama, Carol M. Highsmith, Library of Congress, public domain, cropped.

Keep reading.

The 8(a) Program Reopened: What Changed and What to Do Before Your Deadline

The 8(a) Program Reopened: What Changed and What to Do Before Your Deadline

The 8(a) program changes that took effect September 10, 2026 replace the social disadvantage presumption with an evidence test, bring back the two-year potential for success review, and give pending applicants 45 days to resubmit. Here is what changed, who it affects, and what to do now.

InsightsOct 18, 2026